5 Way Manifold Valve


AKI 5 WAY manifolds pipe to pipe (R), pipe to flange (T) and flange to flange (H) designed for connecting system impulse lines & transmitters. These manifolds consist of 1/2" NPT(F), pipe to flange or flange to flange connections on 54mm (2 1/8") centers, and of one equaliser valve, two block valves, one Bleed Valve and 2 nos 1/4" NPT(F) purge (VENT) connections.

These manifolds are rugged in construction to withstand high pressures and temperatures. The manifolds are rated for pressures as high as 6000 psi at 200 o F or 4000 psi at 500 o F. with PTFE Packing. For a Higher Temperatures Grafoil Packing is used.

Features

  • One Piece Barstock Forged Body for high strangh and fully safety.
  • Bonnet lock prevents accidents disassembly.
  • Stem threads rolled and hard plated provides maximum service life.
  • Two Part Stem tip, stellited and hardened provides excellent flow control and ensures buble-tight shutt off.
  • Non Rotating Vee / Ball Tip design: Which forms a bearing joint with the stem eliminates rotation between plug & seat at closure. This prevents scoring and gailing up the valve seat and ensure long life in repetitive shutt off service.
  • Packing below stem threads prevents stem lubrication washout and isolate threads from system fluids.
  • Hard seat designed to reduce packing friction giving very low torque operation.

Construction      

    SS-316, SS-304, Carbon steel, Monel & Inconel.