2 Way Manifold Valve


AKI 2 WAY manifolds are designed for connecting system impulse line & transmitters. These manifold consist of two valve configuration which allows for easy isolation, calibration, block and bleed for gauges, pressure switches and static pressure transmitting instruments. These manifolds are rugged in construction to withstand high pressures and temperatures. The manifolds are rated for pressures as high as 6000 PSI at 200 o F or 4000 PSI at 500 o F. with PTFE Packing. For a Higher Temperatures Grafoil Packing is used. These valve manifolds combine the functions of a tee, calibration valve, isolation valve and all tubing and fittings into a single compact unit thus reducing number of fittings and space required for installation 

Features

  • One Piece Barstock Forged Body for high strangh and fully safety.
  • Bonnet lock prevents accidents disassembly.
  • Stem threads rolled and hard plated provides maximum service life.
  • Two Part Stem tip, stellited and hardened provides excellent flow control and ensures buble-tight shutt off.
  • Non Rotating Vee / Ball Tip design: Which forms a bearing joint with the stem eliminates rotation between plug & seat at closure. This prevents scoring and gailing up the valve seat and ensure long life in repetitive shutt off service.
  • Packing below stem threads prevents stem lubrication washout and isolate threads from system fluids.
  • Hard seat designed to reduce packing friction giving very low torque operation.
  • Packing material – PTFE / Ccrafoil

Construction      

    SS-316, SS-304, Carbon steel, Monel & Inconel.